中空玻璃生產線是用來生產槽鋁式中空玻璃的一體化中空玻璃加工設備。為大家簡單介紹一下中空玻璃生產線的構造及功能：

The insulated glass production line is an integrated insulated glass processing equipment used to produce trough aluminum insulated glass. Let me briefly introduce the structure and function of the insulated glass production line for everyone:

1.上片段—將玻璃側立著放置在生產線最右端，電機帶動輸送輪進入清洗段；

1. Upper segment - Place the glass side upright at the far right end of the production line, and the motor drives the conveyor wheel into the cleaning section;

2.清洗段—由噴水嘴將清洗用水噴在玻璃表面，電機帶動毛刷清洗玻璃；

2. Cleaning section - The cleaning water is sprayed onto the surface of the glass by a water spray nozzle, and the motor drives a brush to clean the glass;

3.風干斷—清洗后玻璃通過海綿棍，然后，風機通過中空玻璃生產線內置風刀，吹干玻璃上的水漬；

3. Air drying and breakage - After cleaning, the glass is passed through a sponge stick, and then a fan is installed on the hollow glass production line with an air knife to dry the water stains on the glass;

4.合片段—鋁框定位機具有玻璃定位以及鋁框定位裝置，能夠完成玻璃定位、鋁框安放及兩片玻璃對齊合片功能。

4. Segmentation - The aluminum frame positioning machine has glass positioning and aluminum frame positioning devices, which can complete the functions of glass positioning, aluminum frame placement, and alignment and lamination of two pieces of glass.

5.卸片段—出料機的末端設有限位裝置，防止玻璃掉下。在電腦程序中規定，當玻璃完全走出合片段后，會自動停下，這時應當及時將玻璃取走，否則會限制前面的輸送段等停止運行；

5. Unloading fragments - The end of the discharge machine is equipped with a limit device to prevent the glass from falling off. In computer programs, it is stipulated that when the glass completely exits the closing section, it will automatically stop. At this time, the glass should be removed in a timely manner, otherwise it will limit the operation of the previous conveying section, etc;