中空玻璃打膠機分成三大類：立式全自動生產線、臥式半自動打膠機、手動打膠機。
There are three types of insulating glass gluing machines: vertical automatic production line, horizontal semi-automatic gluing machine and manual gluing machine.
立式全自動生產線：整體自動化程度較高，基本不需要人工操作。因其適合量產，所以更適合規模較大、工程量較多的企業。如果我們規模沒有那么大，承接工程沒有那么多，就需要多考慮考慮了。
Vertical automatic production line: the overall degree of automation is high, basically no manual operation. Because it is suitable for mass production, it is more suitable for enterprises with large scale and large quantities. If our scale is not so large and we do not undertake so many projects, we need to consider more.
手動打膠：全程需要人工操作，工作需要技術性。而且工作效率較低，工作難度大。所以除非能確保兩位以上技術嫻熟的打膠師傅，為你工作。否則不推薦。
Manual glue: the whole process needs manual operation, and the work needs technicality. And the work efficiency is low, the work is difficult. So unless we can make sure that more than two skilled gluing masters work for you. Otherwise, it is not recommended.
臥式半自動打膠機：整體來說，臥式半自動打膠機的綜合評分是高的。它是介于立式全自動和手動打膠之間的一款。具備自動打膠功能，從這方面來說要遠遠超越手動打膠。還能滿足中空玻璃生產的工程需求，雖然產量方面不能媲美全自動生產線，但是作為中小型企業的生產絕對夠用。臥式半自動打膠機的占地面積要遠遠小于立式全自動生產線，也就10平方米左右。
Horizontal semi-automatic glue machine: Overall, the comprehensive score of horizontal semi-automatic glue machine is the highest. It is between a vertical automatic and manual glue. It has the function of automatic gluing, which is far beyond manual gluing. It can also meet the engineering needs of insulating glass production. Although the output is not comparable to the automatic production line, it is absolutely enough for small and medium-sized enterprises. The floor area of the horizontal semi-automatic gluing machine is far less than that of the vertical automatic production line, which is about 10 square meters.

更新內容：
Update content:
臥式中空玻璃打膠機設有驅動傳動機構和控制機構，驅動傳動機構是公知公用的、例如電機、皮帶組成的驅動傳動機構，電機、齒輪齒條組成的驅動傳動機構等等；控制機構也是公知公用的，例如PLC(可編程序控制器)柜，電器控制柜等控制機構連接驅動傳動機構，控制其工作狀態，驅動傳動機構連接膠槍，控制膠槍在直線滑道上的運動狀態。
The horizontal insulating glass gluing machine is equipped with a drive transmission mechanism and a control mechanism. The drive transmission mechanism is known and common, such as a drive transmission mechanism composed of a motor and a belt, a drive transmission mechanism composed of a motor and a gear rack, etc; The control mechanism is also known and public. For example, PLC (programmable logic controller) cabinet, electrical control cabinet and other control mechanisms are connected with the driving transmission mechanism to control its working state. The driving transmission mechanism is connected with the glue gun to finally control the movement state of the glue gun on the linear slide.